How drone building washing works
A cleaning drone is a large multirotor tied to the ground by a tether. The tether carries a water hose and, on most systems, power, so the drone can work for hours instead of minutes. A pump on a trailer feeds it. For glass, the water is purified (reverse osmosis and deionized), so it dries without spots. For facades and roofs, the crew mixes a soft wash solution that loosens dirt, algae and mildew at low pressure, then rinses.
A typical job: the crew sets a cleared zone below the face being washed, the pilot flies the drone in vertical lanes from top to bottom, and a ground tech handles the first floor, entries and anything behind trees or balconies. One face at a time, then the next.
Is it safe?
Nobody hangs from the roof, which removes the main risk of the work. What remains is managed with a tether, a cleared zone, wind limits and FAA rules: the pilot holds a Part 107 certificate and gets airspace authorization near airports. Ask any provider how they keep people and cars out of the spray zone and what their wind limit is.
Water, chemicals and runoff
Glass is washed with pure water and no soap. Facades and roofs use soft wash products, usually diluted sodium hypochlorite with a surfactant, which kill algae and mildew. Ask for the safety data sheet of every product and how the crew protects plants, metal and the storm drain. Some states treat algaecides as pesticides and license the people who apply them; see rules by state.
Insurance
Ask for a certificate of insurance that names you as additional insured, with general liability and aviation (drone) liability. Many owners and managers ask for at least $1 million per occurrence; your lender or board may set the number. Workers' compensation should cover the ground crew.
Hiring checklist
- Part 107 certificate for every pilot, and the drone's FAA registration.
- Certificate of insurance with aviation liability, naming you.
- Safety data sheets for every product, and a runoff plan.
- A written scope: which faces, glass, frames, sills, roof, and what the ground crew covers.
- Airspace check for your address, and the authorization if needed.
- Wind and weather policy, and how rescheduling works.
- Tenant notice: who sends it and when (a week ahead is common).
- A price you can check against the measured size of your building. That is what the instant estimate is for.
How often to wash
Glass on offices and hotels is usually done two to four times a year. Facades once a year, or every other year on clean, dry sites. Humid climates grow algae on shaded walls faster, desert sites collect dust, and coastal buildings collect salt. Programs cost less per visit: twice a year is 10% less and quarterly 15% less in RoboQuote's price book. Costs by state are on the cost index.
Any US address, measured and priced in about a minute. No call, no signup.